Quality & Regulatory
What a Stage-Gate Review Should Ask About the Magnesium in a New Beverage
The evidence R&D, quality, regulatory and procurement teams should ask for at each stage gate when a new beverage uses magnesium glycinate.

In a large beverage company, a new product usually passes a series of stage-gate reviews. It moves through each gate in front of a review panel from R&D, quality, regulatory, procurement and sometimes marketing. The magnesium ingredient for beverages is usually a small line in the formula, but it touches every one of those functions. If the right questions are not asked at the right gate, the project finds out at scale-up that the label number cannot be met, the taste fails in the final base, or the supplier's documents do not fit the company's qualification file.
This guide sets out what each gate should ask about the magnesium and what evidence answers the question. It assumes magnesium glycinate as the source, but most of the questions apply to any magnesium salt.
Gate 1. Concept and route
The first gate decides what kind of product this is. The answers shape every later decision.
Conventional beverage or dietary supplement? FDA's guidance on distinguishing liquid dietary supplements from beverages lists the factors that matter, including name, packaging, serving size, recommended daily intake, composition and marketing. A drink named as a water or soda is a conventional food. Our page on liquid dietary supplements and conventional beverage development covers how those factors show up in a development file.
Is the vehicle suitable for fortification? FDA's fortification principles in 21 CFR 104.20 say FDA does not consider it appropriate to fortify snack foods such as candies and carbonated beverages. 21 CFR 104.20 is the fortification policy in the Code of Federal Regulations. FDA's questions and answers on the fortification policy are guidance marked as containing nonbinding recommendations; the two are not the same. That document also says the policy does not apply to dietary supplements. Under 21 CFR 101.54(e)(1)(ii), when a relative claim such as "fortified," "more," "added," "extra," "plus" or "enriched" is based on a nutrient that has been added to the food, that fortification must be in accordance with the policy in 104.20. That requirement applies to those claims; it is not a general rule for every beverage that contains added magnesium.
What is the magnesium target? The Daily Value for magnesium is 420 mg under 21 CFR 101.9(c)(8)(iv). The NIH Office of Dietary Supplements' magnesium fact sheet gives an adult Tolerable Upper Intake Level of 350 mg for supplemental magnesium, which excludes magnesium naturally present in food. A cautious review considers how much added magnesium a consumer could take in from several servings and from other products.
Evidence for this gate: a one-page route decision, the target per serving and per day, and the claims the brand intends to make.
Gate 2. Feasibility
The feasibility gate asks whether the target can be delivered in the chosen format with acceptable taste and appearance.
Does the mass fit? Convert the elemental target into ingredient mass at the grade's assay. At 84 mg per 355 mL serving and an 8% grade, the drink needs 1.05 g of magnesium glycinate per serving. The serving format mass and volume budget shows how to check this against the format.
Does it dissolve and stay clear in the real base? A bench screen at the planned pH, acid system and process temperature answers this better than a solubility number in water. The beverage clarity and stability screen and the solubility and dissolution test design page give a simple setup.
Is the taste acceptable at target? Run a sensory screen at equal elemental magnesium against the control. The sensory evaluation page covers panel design.
Evidence for this gate: bench screen results, a sensory summary and the grade selected. A beverage grade magnesium glycinate should come with solution appearance, pH and taste data from the supplier, so feasibility work starts from known behavior.
Gate 3. Development and stability
The development gate locks the formula and starts the shelf life study. Our guide to planning shelf life testing for a magnesium glycinate beverage covers how to set that study up.
Is the label amount supported through the end of the labeled date? Added magnesium is a Class I nutrient under 101.9(g), so the drink must be formulated to deliver at least the declared amount. The stability protocol should measure magnesium alongside pH, appearance and flavor. Our guide to pH and heat stability testing covers the process screen that should come before the shelf life study, and the packaging and storage stability page covers what to watch during storage.
Is any overage justified? If a measured result or the amount delivered per serving declines, first check representative sampling, distribution, the analysis and process loss. A falling assay is not by itself evidence that elemental magnesium has degraded in storage, and recording an overage does not, by itself, establish that the finished product meets the Class I requirement to be formulated to at least the declared amount. The assay adjustment, process loss and overage page shows how to keep label, formula and batch input separate.
Evidence for this gate: final formula, process description, stability protocol and early results.
Gate 4. Supplier qualification
This is where quality and procurement take the lead. For a magnesium beverage formulation, the qualification file usually includes:
- the ingredient specification with methods and the assay basis
- lot COAs from more than one lot
- the safety data sheet
- allergen, Non-GMO Project Verified, Kosher and Halal statements where needed
- the regulatory basis for use in food, such as a self-affirmed GRAS statement under 21 CFR 170.30
- change notification and supply continuity commitments
Ask how the supplier controls lot consistency and how it notifies changes. Our guides to evaluating a new magnesium glycinate supplier and specification change control cover these steps. For conventional beverages, if the receiving facility's hazard analysis identifies a hazard requiring a supply-chain-applied control, a supply-chain program is required under 21 CFR 117.405(a)(1), except as provided in 117.405(a)(2) and (a)(3).
Evidence for this gate: approved supplier status, agreed specification, and a comparison of supplier COAs with the company's own incoming results.
Gate 5. Scale-up and launch
The last gate checks that the commercial process makes the same product the development team tested.
Does the batch record match the label? The label amount, formula amount and batch input calculated from the lot assay should be visible side by side. Has the co-packer received the right documents? Our beverage co-packer guide lists what to hand over. Is supply ready? Confirm stock, pack format and delivery timing for the launch volume and the first reorder.
Evidence for this gate: pilot and first commercial batch results against the finished product specification, and a confirmed supply plan.
A summary table for the review panel
Gate | Key question about the magnesium | Evidence |
|---|---|---|
Concept | Route, vehicle and target | Route decision, target, intended claims |
Feasibility | Mass, clarity and taste at target | Bench screens, sensory summary, grade |
Development | Label amount through the end of the labeled date | Stability protocol and data, overage rationale |
Qualification | Supplier and specification | Specification, COAs, statements, change terms |
Launch | Batch record and supply | Batch results, supply plan |
Frequently asked questions
Which function should own the magnesium questions?
R&D usually owns feasibility and development, quality owns qualification, and regulatory owns route and label. One project lead should keep the answers in one file.
Does the Upper Intake Level apply to fortified beverages?
The NIH fact sheet defines the adult UL of 350 mg for magnesium from supplements and medications; that value is not a regulatory limit for conventional fortified beverages. A cautious review panel still checks how much added magnesium a consumer could take in from several servings and from other products.
What should a supplier provide before Gate 2?
At least a specification, a lot COA and free samples of the proposed grade, so the team can run bench and sensory screens on the actual material.
Bring the documents your review panel needs
MagneINNO magnesium glycinate is supplied by NutraINNO USA Inc., is self-affirmed GRAS and is produced at an NSF GMP for Sport registered facility. We provide specifications, lot COAs, statements and free 50 g samples for beverage feasibility work. Contact our technical team to request a document package for your stage-gate file.
Need documentation?