The practical answer
Test magnesium in carbonated beverages in the carbonated finished product, in the intended package, at a stated carbonation level and temperature. A still sample of the same formula answers a different question. Fix the elemental magnesium per serving first, add the ingredient before carbonation in a recorded order, degas every sample the same way before measuring pH or magnesium, and keep an unfortified carbonated control on the same schedule. The regulatory team should settle the fortification policy question for a conventional sparkling product before the trial is scaled. [1][2]
Settle the category question before the bench work
FDA's fortification policy says it does not consider it appropriate to fortify snack foods such as carbonated beverages. The policy is guidance for conventional foods and does not bind a product in the way a regulation does, but a reviewer will ask how a conventional magnesium sparkling water formulation addresses it. Part 114 also excludes carbonated beverages from the acidified foods regulation, so the process classification has to be confirmed rather than assumed from pH. [1–3]
The magnesium beverage formats guide covers the category choices for still, sparkling and powder formats. This page assumes that question is being handled and covers how to run the trial itself.
Fix the serving arithmetic first
The reference amount customarily consumed for carbonated and noncarbonated beverages is 360 mL, so a 360 mL serving is a practical starting point for bench calculations. At 42 mg elemental magnesium per 360 mL serving, which is 10% of the 420 mg Daily Value, an ingredient with an 8% as-is assay needs 0.525 g per serving. That is about 1.46 g of ingredient and about 117 mg of magnesium per liter of finished drink. [4][5]
If the base water already contains magnesium, measure it and subtract it from the target before calculating the ingredient. Use the magnesium beverage batch quantity calculator to scale the per-serving figure to a pilot batch, keeping process loss and any approved overage separate.
Add magnesium before carbonation and record the order
Dissolve or disperse the magnesium ingredient in the still syrup or still base, confirm it is fully incorporated, then carbonate. Adding a powder to an already carbonated liquid releases gas and gives an uncontrolled sample. Write down the order of addition for every ingredient, the mixing time, the temperature and the hold time before carbonation, because a later change to any of them can change appearance.
If the plant will carbonate inline after blending syrup with water, mimic that step at the bench: prepare the syrup at the planned concentration, check it for haze or sediment, then dilute and carbonate. A syrup that looks acceptable can still behave differently after dilution and carbonation.
Measure carbonation in a stated unit and temperature
Report carbonation either as gas volumes or as grams of carbon dioxide per liter, and state the method and the temperature of measurement. Carbon dioxide is less soluble in water at higher temperature, so a reading without a temperature cannot be compared with the next one. Measure the unfortified control and the fortified sample with the same equipment on the same day. [6]
Run at least two carbonation levels if the commercial target is not yet fixed, for example the intended level and a higher level chosen in advance. That shows whether appearance or foaming depends on carbonation, which a single level cannot show.
Degas the same way before pH and magnesium tests
Dissolved carbon dioxide changes the measured pH, and bubbles interfere with pipetting and with instrument readings. Define one degassing procedure, such as stirring or sonication for a stated time at a stated temperature, and apply it to every sample and control before measuring pH, total magnesium or turbidity. Record whether the pH value is for the degassed sample, because that is what the number means.
For magnesium content, analyze the degassed liquid with a method suited to the beverage matrix and run the unfortified control alongside it. The difference between the two is the magnesium contributed by the formula; the control shows what the water and other ingredients add.
Check the product in its final package
Fill the trial in the intended container type and closure. Record appearance after filling and at each agreed time point, viewed under stated lighting against a dark and a light background. Note any haze, sediment, ring at the liquid line, or foaming and gushing when the container is opened, and record the opening temperature. Carry the same observations for the unfortified carbonated control so changes caused by carbonation or the package are not assigned to the magnesium ingredient.
Taste and mouthfeel should also be compared in the carbonated product, because carbonation and acidity change how a mineral note is perceived. Use the methods in the sensory evaluation guide and compare at equal elemental magnesium.
What the trial can and cannot show
A complete trial shows whether the chosen ingredient, loading, order of addition and carbonation level give an acceptable appearance, pH and magnesium result in the intended package over the time points tested. It does not set a shelf life on its own, it does not show behavior at a different carbonation level or in a different container, and it does not decide the regulatory category.
Common questions
Can a still version of the drink stand in for the carbonated trial?
No. Carbonation changes pH, gas release and the way haze and sediment form and appear. Test the carbonated product in its package, with a still sample only as an extra reference.
Does part 114 apply to a carbonated magnesium drink?
Part 114 excludes carbonated beverages from its coverage. The regulatory team still decides which other requirements apply to the product and process.
Sources & further reading
- 21 CFR 104.20, Nutritional quality guidelines: statement of purpose (fortification policy)
- FDA, Questions and Answers on FDA's Fortification Policy (November 2015)
- 21 CFR 114.3, Acidified foods: definitions
- 21 CFR 101.12, Reference amounts customarily consumed per eating occasion
- 21 CFR 101.9, Nutrition labeling of food
- NIST Chemistry WebBook, carbon dioxide: Henry's law data
