Skip to content

Formulation worksheet

Magnesium Stock Solution Dosing Calculator

Enter how the stock was made up and the beverage target. The worksheet returns the stock concentration, the stock volume per serving and per batch, and the share of the batch the stock occupies. It assumes you have confirmed the stock is a clear, uniform solution at that concentration; it does not predict solubility. All prefilled values are illustrative arithmetic examples only.

Ingredient mass used to prepare the stock.

Lot assay on the as-is basis.

Volume after dissolving and making up to the mark, not the water added.

The total elemental magnesium the finished serving should contain.

From water or other ingredients. Enter 0 if none.

Finished serving volume.

Final volume of the batch with the stock included.

Calculated result

Enter the values above to calculate. Results appear here.

Assumes a verified clear, uniform stock solution. The worksheet returns an error if existing magnesium reaches or exceeds the target, or required stock volume is not less than the serving volume. Confirm the stock and the finished batch by analysis.

How the dosing is calculated

Stock concentration = ingredient grams × 1,000 × elemental magnesium as-is (%) ÷ 100 ÷ final stock volume in mL. With 50 g of an 8% ingredient made up to 1,000 mL, the stock holds 4 mg of magnesium per mL. Stock per serving = (target − magnesium already present) ÷ stock concentration, so 84 mg needs 21 mL of stock in each 355 mL serving. For a 100 L batch of about 281.7 servings, that is about 5.92 L of stock, close to 5.9% of the batch volume, and about 0.296 kg of ingredient.

The batch volume here is the final volume with the stock included. If your process adds a fixed volume of stock to a fixed volume of base, adjust the base so the finished volume and concentration stay as planned.

When a stock solution is appropriate

A stock makes dosing easier in magnesium beverage formulation, especially for small pilot batches, but only if the stock is fully dissolved and uniform when it is dosed. Confirm the concentration by analysis of the stock at the concentration and temperature you will use and over the time it will be held. The calculator does not check solubility, stability of the stock or interactions in the finished drink; this worksheet is only for a verified clear, uniform solution. Cloudy or settling systems require a separately validated dosing method; this worksheet does not judge their suitability.

Related technical guides